The Beginners Guide To Homes (Chapter 1)

The Beginners Guide To Homes (Chapter 1)

What You Should Know Regarding Log Home Builder Kits The first decision which you have to make when you think about using the log home builder kits for building that log home is the method of its construction. You may choose the saddle notch method or you can have the butt-and-pass method. Each style would actually refer to the manner in which the home is jointed at its corners. You have to know that the saddle notch method would require the builders to cut that notch in the log that fits a perpendicular log that is going to be placed on top of this. The logs are then continuously stacked in such fashion to build a wall and the weight of the logs would make them lock lightly and create those secure corners. There are builders that drive a stake or bolt through the logs to add security. With the butt-and-pass method, the perpendicular log is then butted against the existing log as the stacking of log starts. On the second level of stacking, the log would pass over the first perpendicular log. On the third level, the log is going to butt up against such perpendicular log. You will have to continue the stacking until a wall is done.
Doing Services The Right Way
Know that such butt-and-pass method that is used with log home kits would make spacing between the logs which have to be filled with chinking and insulation, which is a method which equates to caulking the log home. Logs are then secured with bolts and stakes driven down from a log to the next.
If You Think You Get Homes, Then This Might Change Your Mind
The saddle notch method would naturally be more expensive for the builders and those homebuyers. One of the reasons is due to the amount of precision to have the logs aligned properly. This is going to take such careful measuring so that the logs are going to be cut at the right inch specifications to allow the perpendicular log to fit into the groove and have that tight corner. Though some of the companies out there are claiming to make use of the butt-and-pass method for the log home kits, there are some critics which have contended such kind of method is not possible with the use of a kit. Kits are usually manufactured in other places and they are shipped for assembly on the area. Some builders actually claimed that the butt-and-pass method is strong and such can’t be shipped in parts and be assembled. A challenge which many homeowners purchasing the log home builder kits face is the settling which happens after assembly. This is a natural process that forces some parts of the home to fall out of alignment about a year or so after the logs dried up.

Comments are closed.